Resize your watch bands, Step By Step
Please send us email, if you get any problem with adjustment or other product issues.
* Know the facts of your watch band
The link watch bands are connected by many pins.
STEP 1: Know the direction of pushing out the pin
The direction the arrow is pointing is the direction the pin should be pushed out
* Please follow the direction, otherwise the will not be pushed out, and the adjustment tool may also be damaged
STEP 2: Screw and push out the pin
Follow the direction of the arrow points
Screw the adjuster and push out the pin
STEP 3: Pull out the pins
Then the desired length of links together
STEP 4: Know the pins
There are two sides of the pin
Important to note
When we put the pin back in to reconnect the links of the band, The U-shaped end goes in first.
STEP 5: Insert the pins back into the hole, reconnect the band
* The U-shaped side of the pin goes in first.
Last Step: Press/Hammer/Screw back the pins, we upgrade the tool for easier adjustment
STEP 6: Place The cap on needle tool to return pins to their place in the band.
Put The Cap over the needle
STEP 7: Align The Cap with the pin, screw and push the pin back
